| ATOMIC
ABSORPTION SPECTROPHOTOMETER Model
GBC 932AA |
- Operational in
double beam configuration
- Incorporates a
graphite furnace for higher sensitivity
- Facility exists
for the analysis of elements such as Bi, Sr, Zn, Ag, Sb, Ti, Mn, Ba, La,
Sn, Fe, Zr, Ca, Pd, Ni, Cd and Nd
|
 |
|
MCHNS
- O analyzer can analyze upto 50 samples in operation |
| Fourier
Transform Infrared Spectrometer Perkin
Elmer - Spectrum 2000 |
| |
|
Samples
like solids, liquids, films, polymers, gels, pastes can be analyzed. System
is having Diffuse reflectance accessory, Horizontal Attenuated total reflectance
and photoacoustic accessory. |
| Differential
Scanning Calorimetry / Differential Photocalorimeter |
| Melting
behaviour , Crystallization, Kinetics, Oxidation stability, Glass transition
, Purity , Specific Heat, Curing property
|
| Solids
& liquids having boiling points below 2500 C will
be easily analyzed with the help of adequate column. |
| GLOW
DISCHARGE - OPTICAL EMMISSION SPECTROPHOTOMETER JY-20000,France |
| Trace
impurities in all metals, alloys, conductive and nonconductive materials
like ceramics and glasses |
| High
Performance Liquid Chromatography |
| Purity
check , qualitative and quantitative estimation of intermediates and products |
| INDUCTIVELY
COUPLED OPTICAL - EMMISSION SPECTROPHOTOMETER JY-4R,France,
and Perkin-Elimer, USA. |
- Trace impurities
in metals, alloys, environmental, geological, reagents and solvents.
- Quantitative and
qualitative analysis for over 70 elements with detection limits in the
parts per billion (ng/mL) to parts per million (mg/L) range.
|
| Facilitates
accurate measurement of inductance, capacitance, resistance and dissipation
factor / loss factor of samples as well as the variations in these parameters
with frequency. |
| OXYGEN
- NITROGEN ANALYZER LECO,
TC-236, USA |
 |
|
Total
Nitrogen and Oxygen are simultaneously determined in ferrous and non-ferrous
metals. |
| HOT
STAGE POLARISING MICROSCOPE Mettler
Toledo FP990,FP90,Leica DMLP |
| Melting
Point, Phase Transition Temp., Morphology of the Phases etc. |
- Accurate determination
of the porosity of samples
- Ore-structure
analysis with respect to volume and pore radius
- Pore-size distribution
in green and sintered ceramic materials
- Measurement of
porosity in the mesoporous and macroporous regions
- Measurements in
the pore radius range from 1.8 nm. to 7500 nm
|
| POTENTIOSTAT
/ GALAVANOSTAT |
- For Voltametric
analysis,
- Cyclic voltammetry
(staircase and linear scan ) ,
- Linear sweep voltammetry
(staircase ) ,
- Chronomethods
( interval time >0.1 s or < 0.1 s ),
- Multimode electrochemical
detection & poteniometric stripping analysis.
|
| PARTICLE
SIZE ANALYZER Microtrac
X-200, USA |
| To
measure powders materials in liquid process in a continuous range from
0.021 to 704 mm without changing the optic system or the calibration. Measuring
powders by dry process Volume/area/number Distribution of particle |
| PARTICLE
SIZE ANALYZER Model
BI – XDC |
| The
measurable range of particle size distribution extends from 0.01 to 100
microns |
| SCANNING
ELECTRON MICROSCOPE Phillips,
X-30 |
| The
XL 30 is a versatile scanning electron microscope with optimum performance
for both imaging and analysis. This makes the system ideal for dedicated
research as well as for routine-operation such as control monitoring of
a manufacturing process. Operating under full software control, the instrument
is an excellent tool for the analysis. |
| THERMOGRAVIMETRIC
ANLYSIS / Simultaneous Differential Thermal Analysis (TGA / SDTA) |
| The
amount of weight lost during a TGA experiment provides quantitative in
sight into the composition of a sample. Additionally, the temperature of
thermal and oxidative degradation are measured. A wide variety of material
behaviour and products can be investigated. Including volatilization, thermal
degradation in an inert atmosphere (pyrolysis), reaction with oxygen or
other reactive gases and amount of residual material (ash, filler).SDTA
give melting, physical and chemical transitions of the sample. |
| THERMAL
ANALYSIS STA
Model TGA / DTA facility |
- Incorporates both
thermogravimetric analysis and differential thermal analysis facilities
to study variations in weight and heat capacity respectively as a function
of temperature simultaneously.
- Facilitates sample
evaluation over a wide range of temperatures from room temperature to 1500oC
- Fully automated
data acquisition system for finer analysis
|
| DYANAMIC
MECHANICAL ANALYZER (DMA) / THERMOMECHANICAL ANALYZER(TMA) |
- Modulus ,
- Rheology,
- Coefficient of
linear thermal expansion,
- Glass transition
temperature ,
- Viscosity and
Cure
|
| UNIVERSAL
TESTING MACHINE Shimadzu
AGS-2000G, Japan |
| Measurement
and study of strength and mechanical behaviour under various loads of metals,
rubbers, plastics and other materials in variety of fields related to automabile,
ceramic, electrical, electronics, building research, plastic and mining
industries. |
| X-RAY
DIFFRACTOMETER Brüker
AXS GmbH model D 5005 |
- Structural characterization
of crystalline materials
- Confirmation/detection
& characterization of phases in materials
- Particle size
analysis through line broadening
- Determination
of surface residual stress
- Recording of spectra
for thin film samples
|
| X-RAY
FLUORESCENCE SPECTROMETER Model
PW 2400 Philips |
| Unambiguous
analysis of a wide range of elements with atomic numbers from 4 (Beryllium)
to 92 (Uranium) present in solids, liquids and powder samples |
|
|
